Home Linux Commandline Tools How to Mount a Remote Linux Filesystem Using SSHFS

How to Mount a Remote Linux Filesystem Using SSHFS

We use the SSHFS command in Linux to mount a remote file system using SFTP (SSH File Transfer Protocol).

SSHFS is a filesystem client used to mount and interact with files and directories on a remote server. SSH protocol is used to encrypt data exchange between the two hosts.

FTP (File Transfer Protocol) is a networking protocol used to transfer files between two computers over a network, SFTP on the other hand in addition to performing a similar function to FTP, it incorporates a security layer used to encrypt the data being sent and received between the two machines over the internet.

Now, how do the two tools work together? Well, SSHFS is just a file system in the user space, for it to perform the function of mounting a remote file system, it utilizes SFTP.

Installing SSHFS in Linux

SSHFS is a Linux-based software tool that is available to install from the standard repositories in most distributions using the default package manager.

$ sudo apt install sshfs       [On Debian, Ubuntu and Mint]
$ sudo yum install fuse-sshfs  [On RHEL/CentOS/Fedora and Rocky Linux/AlmaLinux]
$ sudo emerge -a net-fs/sshfs  [On Gentoo Linux]
$ sudo pacman -S sshfs         [On Arch Linux]
$ sudo zypper install sshfs    [On OpenSUSE]    

Mounting the Remote Linux File System

For this to work, the remote server needs to be reachable therefore perform some ping requests. We should also make sure that we have the server credentials e.g password.
SSH also needs to be configured on both the server and client machines.

The syntax for the command is:

$ sshfs [user@]host:[dir] mountpoint [options]

From the syntax we have:

  • user – This specifies the username on the server. When connected via SSH, we are prompted for a password for the remote user account with the specified username.
  • host – We specify the hostname of the remote server, we could specify a domain name e.g www.example.com which is easier to recall or an IP address.
  • dir – This specifies the path of the remote directory.
  • mountpoint: This specifies the location in which we want our file system to be mounted, Note that this is in our local system. Normally file systems are mounted in the /mnt directory.

The image below shows the IP address and file system of the remote server we want to mount to our local system.

Remote Linux Filesystem
Remote Linux Filesystem

On our local system, let’s create a directory preferably in the /mnt directory where we will mount the remote file system:

$ sudo mkdir /mnt/remoteFS

Now to mount the remote Linux file system that is located at 192.168.100.62 at /home/user directory, we write:

$ sudo sshfs -o allow_other [email protected]:/home/user /mnt/remoteFS/

When we execute the above command we are prompted for a password for the remote system user account which we have specified within the command.

Mount Remote Linux Filesystem
Mount Remote Linux Filesystem

After the password is accepted the remote file system is mounted on our local system on the selected mount point /mnt/remoteFS. Note that we have used the -o allow_other option to allow other users to read and write to the mounted file system.

To verify that the remote Linux file system is mounted, run:

$ sudo ls /mnt/remoteFS
Check Remote Linux Filesystem
Check Remote Linux Filesystem

From the above image, we list the remote file system which is now mounted on our local machine. You can also check its mount point in our local system by using.

$ df -Th
Check Remote Linux Filesystem Mounts
Check Remote Linux Filesystem Mounts

Caution: DON’T DELETE THE FILE SYSTEM!! – We should not delete the mounted file system as it will also be deleted on the remote server and we don’t want this.

Permanently Mounting the Remote Linux File System

The mounting we have seen thus far is only temporary, to mount the remote file system permanently, we edit the fstab file located in the /etc directory as follows:

$ sudo vim /etc/fstab

After the file is open, paste the following line, remember to use details specific to your setup.

sshfs#[email protected]:/home/user/ /mnt/remoteFS fuse.sshfs defaults 0 0
Mounting Remote Linux File System Permanently
Mounting Remote Linux File System Permanently

To mount the file execute the following command:

$ sudo mount -a

Now even if we are disconnected from the remote machine, the file system will remain mounted in the specified directory we had mounted it on previously.

Unmounting the Remote Linux File System

Suppose we are done with this filesystem we can unmount it using the umount command as follows:

$ sudo umount /mnt/remoteFS

We have learned how to mount a remote file system to our local machine and perform this over SSH protocol for security purposes. We have also seen how to mount the file system on our local system permanently by editing the /etc/fstab file.

Ravi Saive
I am an Experienced GNU/Linux expert and a full-stack software developer with over a decade in the field of Linux and Open Source technologies. Founder of TecMint.com, LinuxShellTips.com, and Fossmint.com. Over 150+ million people visited my websites.

Each tutorial at UbuntuMint is created by a team of experienced writers so that it meets our high-quality standards.

Was this article helpful? Please add a comment to show your appreciation and support.

3 thoughts on “How to Mount a Remote Linux Filesystem Using SSHFS”

  1. Caution: DON’T DELETE THE FILE SYSTEM!! – We should not delete the mounted file system as it will also be deleted on the remote server and we don’t want this.

    I am not sure what you are saying?

    don’t delete files in the mounted sshfs directory?

    Reply
    • @Charles,

      It says that, after mounting remote Linux filesystem (directory), don’t delete the mounted directory (filesystem), if you do so, it will also delete on the remote system.

      Reply
    • While the remote file system is currently mounted on your local system, any changes made will be reflected on the remote file system. This includes deletions, additions, and such.

      Reply

Leave a Reply to Ravi Saive Cancel reply

Thanks for choosing to leave a comment. Please keep in mind that all comments are moderated according to our comment policy, and your email address will NOT be published or shared. Please Do NOT use keywords in the name field. Let's have a personal and meaningful conversation.